Vehicles
International Harvester S1800 recalls
10 recall campaigns on record. Pick a model year, or see them all below. Check your VIN with International Harvester or NHTSA to see if your vehicle still needs a repair.
All International Harvester S1800 recalls
10- Jan. 14, 1986International Harvester S1600, S1700, S1800 and others: Idler and attachment Steering arm May crack after repeated Full Lock turns due to The lack of end-of-Travel relief features. Consequence of defect: loss of Steering…
- April 2, 1985International Harvester S1600, S1700, S1800 and others: Arm The Steering arm May crack after repeated Full-Lock turns. Consequence of defect: if cracks Progress to complete fracture of The arm, Steering…
- Dec. 2, 1983International Harvester S1700, S1800, S1900: Hose, piping, and connections Within The Steering System, High operating temperatures May cause eventual deterioration of The Hose which returns Power Steering fluid to The Pump.…
- Aug. 17, 1983International Harvester S1600, S1700, S1800 and others: Tie rod assembly The nuts that Mount The Tie rod ends to The Steering arms May not have been securely fastened; The nuts could loosen And eventually fall Off. Also…
- March 14, 1983International Harvester CO1700, CO1800, CO1900 and others: Drum The 3/4 inch diameter fasteners which join The rear Axle Brake drum to The Wheels were not tightened properly. These fasteners May loosen during…
- Jan. 10, 1983International Harvester S1700, S1800, S1900 and others: Gear box (other than rack and pinion) Under certain circumstances, The output shaft of The Steering Gear May develop cracks at a location between The Gear And The pitman arm mounting. The…
- April 23, 1982International Harvester S1700, S1800, S1900 and others: Pedal/hand lever(motorcycle) On The involved Vehicles The clutch Pressure plate May suddenly self destruct, scattering broken fragments.
- Oct. 22, 1981International Harvester S1700, S1800, S1900: Hoses, lines/piping, and fittings An Extra Adapter fitting used along with an incorrect through-Frame fitting May have been installed in The fluid Line. The additional length of The…
- March 25, 1981International Harvester S1700, S1800, S1900: Tie rod assembly The nut that fastens The tapered Tie rod ends to The Steering arms May not have been sufficiently tightened on certain Vehicles. The nut could loosen…
- March 19, 1980International Harvester S1600, S1700, S1800 and others: Hoses, lines/piping, and fittings The Brake fluid lines which Run to And from The Frame mounted Power assist unit May be incorrectly routed resulting in The lines rubbing or chafing…
No International Harvester S1800 recalls match.