Vehicles

Winnebago CW825FT recalls

7 recall campaigns on record. Pick a model year, or see them all below. Check your VIN with Winnebago or NHTSA to see if your vehicle still needs a repair.

1990 7

All Winnebago CW825FT recalls

Sept. 17, 1991Winnebago CW822FT, CW822FW, CW825FT and others: Horn The horn activating switch Components located in The Steering column Can Wear abnormally.
Sept. 17, 1991Winnebago CW822FT, CW822FW, CW825FT and others: Gear box (other than rack and pinion) The Steering Gear mounting bracket bolts May become loose And allow The Gear to move out of position.
Sept. 17, 1991Winnebago CW822FT, CW822FW, CW825FT and others: Shock absorber The rear shock absorber bracket causes The rear shock absorber lower mounting hardware to fail prematurely.
Sept. 17, 1991Winnebago CW822FT, CW822FW, CW825FT and others: Control arm The lower ball joint retaining nut that holds The lower ball joint to The Steering knuckle was not torqued correctly.
Sept. 17, 1991Winnebago CW822FT, CW822FW, CW825FT and others: Rack and pinion The Steering Gear intermediate shaft clamps used to retain The intermediate shaft to The Steering Gear shaft And The column shaft Can become loose…
Sept. 17, 1991Winnebago CW822FT, CW822FW, CW825FT and others: Hub The front And rear Wheel hub retainer nuts have been incorrectly torqued. The preload on The Bearing from The loosened hub retainer nut May cause…
Sept. 17, 1991Winnebago CW822FT, CW822FW, CW825FT and others: Wheels Road debris May enter an opening in The rear Suspension trailing arm And damage The Bearing Seal.