GE Healthcare recalls | PlainRecords

Centricity Enterprise Archive V2… and 5 more products

Wed, 23 Sep 2026 00:00:00 +0000

Under certain conditions historical imaging data migrated from a legacy system may become incorrectly associated with a different patient. If this occurs, studies or images may be displayed under the wrong patient record, which could lead to misdiagnosis or a delay in patient care.

SIGNA Premier systems

Wed, 08 Apr 2026 00:00:00 +0000

Whole-Body MR scanners used to produce images of the inside of the human body to aid diagnosis of disease may have been manufactured/serviced with ferrous (steel) fittings instead of non-ferrous (brass) fittings on the magnet rear and if system is accessed to perform service while the magnet is ramped, the magnetic field could attract the ferrous fittings potentially resulting in personnel injury.

GE Healthcare Centricity Universal Viewer Zero Footprint Client…

Wed, 11 Mar 2026 00:00:00 +0000

Under certain workflows, patient information shown in the viewer may not match the images displayed on Centricity Universal Viewer Zero Footprint Client (ZFP) with versions ZFP v6.0: SP11.6, SP11.6.0.1 and SP11.6.1 on systems with Patient Timeline installed,

GE HealthCare ViewPoint 6…

Wed, 24 Dec 2025 00:00:00 +0000

GE HealthCare has become aware that the Patient History tab in ViewPoint 6 versions 6.15.3 and 6.15.4 ultrasound software may not include complete patient medical history information.

GE Healthcare Centricity Universal Viewer (UV)… and 4 more products

Wed, 09 Apr 2025 00:00:00 +0000

There is a potential security vulnerability in Centricity Universal Viewer (UV), Centricity PACS-IW (PACS-IW), Centricity Radiology RA600 (RA600), & Centricity Cardiology CA1000 (CA1000) where the service login credentials are able to be identified which could allow a malicious actor with these credentials to access the system and potentially manipulate patient data.

SIGNA Creator… and 4 more products

Wed, 05 Mar 2025 00:00:00 +0000

For certain MR systems, a scan can be resumed following a Power Monitor trip when the "6-minute average SAR" is above the limit indicated on the "SAR Display". The user interface may incorrectly enable a scan to proceed earlier than intended. If resumed by the operator, such a scan can result in potential excessive tissue heating, especially if the patient is in contact with a conductive material…

GE Healthcare Discovery RT… and 16 more products

Wed, 11 Dec 2024 00:00:00 +0000

GE HealthCare has become aware of a potential issue on certain Discovery, Optima, Revolution series CT systems, and certain operator console upgrades that can result in rotated CT images. Particularly with helical, cine, and cardiac (if applicable) scan modes, after the first image of an exam, each subsequent image can be rotated by an increasing amount. The amount of progressive image rotation…

GE Proteus XR/A radiographic system

Wed, 04 Dec 2024 00:00:00 +0000

Steel cables in the Wall Stand for certain Proteus XR/a systems serviced by GE HealthCare have not been replaced at the intervals detailed in the Preventative Maintenance Action List.

GE Healthcare Centricity Universal Viewer Zero Footprint…

Wed, 13 Nov 2024 00:00:00 +0000

GE HealthCare has become aware of an issue in Centricity Universal Viewer Zero Footprint Client (ZFP) where there is a potential security vulnerability which could allow a malicious actor to access the system and potentially manipulate patient data.

GE Healthcare Centricity Universal Viewer Zero Footprint Client…

Wed, 16 Oct 2024 00:00:00 +0000

GE HealthCare has become aware of an issue in Centricity Universal Viewer Zero Footprint Client (ZFP) version v6.0 SP11.x where the latest report is not shown by default to the user. The issue may occur when a study has multiple DICOM structured reports (i.e. preliminary, final, and/or addendum) stored in different series.

GE Healthcare Centricty PACS…

Wed, 02 Oct 2024 00:00:00 +0000

GE HealthCare has become aware of an issue where image storage is not possible when Centricity PACS reaches the maximum number of unique image identifiers (Ckeys). If this occurs, it can result in acquisition of a partial study.

GE Healthcare Centricity Universal Viewer Zero Footprint Client…

Wed, 25 Sep 2024 00:00:00 +0000

Footprint Client (ZFP) versions v6.0 SP9.x and SP10.x where the latest addended report is not shown by default to the user. The issue occurs when the addendum is created on the same day as the original report but at a different time, and only when launched on the following browsers. " Internet Explorer 10 (IE10) " Internet Explorer 11 (IE11) " Firefox.

ViewPoint… and 1 more product

Wed, 25 Sep 2024 00:00:00 +0000

The National Institute of Standards and Technology (NIST) has identified in the National Vulnerability Database (NVD) that NexGen Healthcare Mirth Connect, prior to version 4.4.1, has a potential vulnerability allowing the deserialization of untrusted data (CVE-2023-43208). Mirth products may have been installed and configured with your ViewPoint / ViewPoint 6 system by GE HealthCare. This…

GE Healthcare Proteus XR/a…

Wed, 04 Sep 2024 00:00:00 +0000

The XR system, Proteus XR/a, does not have a de-installation manual describing process steps for de-installing the devices. De-installation instruction process steps must be followed when de-installing these devices to avoid personnel injury during de-install.

Centricity Universal Viewer Workflow Manager… and 1 more product

Wed, 01 Nov 2023 00:00:00 +0000

When using Universal Viewer or Centricity Universal Viewer with Workflow Manager (WFM), if a third-party reporting application is used to launch exams, it could display information on a different patient than WFM and the Viewer.

Centricity PACS-IW… and 2 more products

Wed, 01 Nov 2023 00:00:00 +0000

GE HealthCare has become aware of an issue where images from two different patients may be contained in a single study, when stored in Centricity PACS-IW V3.7.x, Centricity PACS-IW with Universal Viewer V5.0 and Centricity Universal Viewer V6.0 with PACS-IW foundation.

Centricity PACS-IW with Universal Viewer… and 2 more products

Wed, 10 May 2023 00:00:00 +0000

GE HealthCare has become aware of an issue where information from two different patients can be mismatched when correcting patient or study information.

(1) GE Centricity Universal Viewer 6.0…

Wed, 31 Aug 2022 00:00:00 +0000

Inaccurate Distance and Area measurements with use of Global Stack viewport.

Service manuals for the CT…

Wed, 17 Aug 2022 00:00:00 +0000

As a result of unclear guidance in the service manual, the table can drop during a specific service activity if the wrong screws are removed by the service personnel without the appropriate table supports in place resulting in injury to service personnel.

Centricity PACS Software Version 7.0 SP0.0.4.7

Wed, 03 Aug 2022 00:00:00 +0000

The Event Notification Manager (ENM) functionality for certain products does not process notifications for study modifications performed on post verified exams.

SIGNA Premier magnetic resonance scanner…

Wed, 27 Jul 2022 00:00:00 +0000

Under rare conditions, SIGNA Premier gradient coils could result in elevated acoustic noise during scanning. After prolonged periods of elevated acoustic noise, this could potentially lead to hearing loss.

GE Healthcare Avance CS2…

Wed, 27 Jul 2022 00:00:00 +0000

The base of the anesthesia system can have a crack and could potentially fracture resulting in a tip or overbalance of the anesthesia system. This can result in potential injury if it falls on a person.

GE Healthcare Aisys CS2 Anesthesia System…

Wed, 27 Jul 2022 00:00:00 +0000

There is a potential reversal of the O2 and air cylinder pressure transducer connections.

GE Centricity Universal Viewer Zero Footprint…

Wed, 13 Jul 2022 00:00:00 +0000

Potential to display inaccurate measurements on images in Centricity Universal Viewer Zero Footprint Client (ZFP)

Back up batteries in Avance CS2 and Avance CS2 Pro anesthesia devices… and 1 more product

Wed, 06 Jul 2022 00:00:00 +0000

Backup batteries can fail earlier than their estimated life.

CARESCAPE Central Station (CSCS) V2…

Wed, 22 Jun 2022 00:00:00 +0000

The CARESAPE Central Station (CSCS) V2 can shut down due to a potential power supply component failure. This can lead to loss of patient monitoring at the central station.

Centricity Universal Viewer Zero Footprint Client and 4 more products

Wed, 15 Jun 2022 00:00:00 +0000

Potential for Distance and Area measurements to display inaccurate measurement values when performed on magnified images, and specific to ZFP, Distance and Area measurements can display inaccurate measurement values when performed on lossy images that are scaled down from their original resolution.

Back up batteries in Ventilators labeled as the following: a… and 1 more product

Wed, 15 Jun 2022 00:00:00 +0000

Insufficient battery backup power resulting in premature shutdown of the ventilator when not connected to AC mains power supply.

GE Healthcare MR Systems…

Wed, 27 Apr 2022 00:00:00 +0000

During the de-installation of an MR system magnet, if all rigging and hardware that attach to the magnet for transportation are not properly installed and secured, the magnet may fall, leading to potential injury.

MUSE Cardiology Information System…

Wed, 20 Apr 2022 00:00:00 +0000

Two scenarios may cause edits to measurements and diagnosis statements can be lost after a test is Signed in the MUSE NX web client.

Signa 1.5T TwinSpeed Magnetic Resonance Imaging System and 3 more products

Wed, 13 Apr 2022 00:00:00 +0000

There is potential for the images to be flipped left to right.

Revolution Apex… and 1 more product

Wed, 13 Apr 2022 00:00:00 +0000

The accumulated dose is incorrectly displayed in certain situations. There are two situations that will result in the SmartStep displayed dose being inaccurately high.

GE Healthcare CARESCAPE Central Station (CSCS) V2.0x MAI700 (Integrated)…

Wed, 23 Mar 2022 00:00:00 +0000

If the CARESCAPE Central Station v2.0 is used with an unapproved keyboard, the audio can be muted resulting in loss of audible alarms.

GE Healthcare MR superconducting magnets… and 31 more products

Wed, 16 Feb 2022 00:00:00 +0000

The magnetic resonance systems could potentially have a cryogen ventilation system that does not meet the venting requirements.

GE Vscan Extend… and 6 more products

Wed, 02 Feb 2022 00:00:00 +0000

The firm identified that the Vscan Extend device will not power on because of depleted battery, due to the device not being turned off prior to battery removal or when being connected to a computer without AC power.

GE Centricity Universal Viewer Zero Footprint Client

Wed, 08 Dec 2021 00:00:00 +0000

There is a potential to display incomplete patient imaging study.

Computed Tomography Systems Revolution CT…

Wed, 01 Dec 2021 00:00:00 +0000

The accumulated dose is incorrectly displayed in certain situations. Thisoccurs during an interventional exam using the SmartStep option if the table height is adjusted after the exam starts. In this situation, the SmartStep display will show a value that is higher (up to 100 times) than the actual dose delivered.

SIGNA Premier nuclear magnetic resonance imaging system and 9 more products

Wed, 27 Oct 2021 00:00:00 +0000

Under certain conditions, some slices may be missing which can lead to a gap of anatomy in the 3D Volume images.

Centricity Universal Viewer 7.0…

Wed, 13 Oct 2021 00:00:00 +0000

A software anomaly exists in the Centricity Universal Viewer study management feature in which study changes are not propagated to either the Centricity Enterprise Archive (EA) or another Vendor Neutral Archive (VNA).

Flow sensors kept as stand-alone user replaceable spare parts for the… and 1 more product

Wed, 06 Oct 2021 00:00:00 +0000

The flow sensors built prior to June 2021 could have damaged tubes with small punctures or cuts that could cause leaks resulting in incorrect anesthesia machine tidal volumes potentially leading to over-delivery of volume to the patient.

AMX Navigate Mobile X-Ray System

Wed, 06 Oct 2021 00:00:00 +0000

An unexpected column motion while attempting to park the column on the AMX Navigate mobile X-ray system.

Centricity PACS-IW with Universal Viewer… and 1 more product

Wed, 29 Sep 2021 00:00:00 +0000

Image acquisition failures and synchronization failure with the Centricity Enterprise Archive

CARESCAPE PDM-Masimo SpO2…

Wed, 04 Aug 2021 00:00:00 +0000

Masimo SpO2 Saturation Values can become frozen after an extended length of use without a power down.

SIGNA Premier… and 13 more products

Wed, 21 Jul 2021 00:00:00 +0000

GE Healthcare has recently become aware of an issue on the affected products listed below where the "Patient Orientation" button may inadvertently be clicked when intending to click on the "Save RX" button. This changes the prescribed patient orientation on the system prior to running the initial 3-Plane Localizer Scan (See Figure 1 for reference to buttons.) Selecting and saving a patient…

The system is intended to produce cross-sectional images of the body… and 2 more products

Wed, 14 Jul 2021 00:00:00 +0000

When adding one or more intended scan groups names must contain only letters, numbers (0-9), or a space or the user interface will not update to confirm the intended group(s) has been added to the acquisition.

Revolution CT

Wed, 14 Jul 2021 00:00:00 +0000

GE Healthcare has become aware of a potential issue on the Revolution CT system where a collimator blade does not find its appropriate home position. This issue could result in the delivered dose of x-ray radiation being either larger or smaller than its prescribed value.

Revolution EVO…

Wed, 07 Jul 2021 00:00:00 +0000

Improperly loaded software options may result in additional X -ray radiation exposure to the patient.

Case Cardiac Assessment System for Exercise Testing and CardioSoft Diagnostic System Exercise Stress Testing…

Wed, 30 Jun 2021 00:00:00 +0000

If a certain sequence of events occur, the pdf test report that belongs to one patient will appear in a different patient's record when viewed in an Electronic Medical Record (EMR) or a similar system.

GE Healthcare Innova IGS 3 (GTIN 00840682147378)…

Wed, 23 Jun 2021 00:00:00 +0000

The IGS system can experience a single vertical line defect where the vertical line divides and horizontally shifts live monitor images into two unequal image parts within the monitor display screen.

NM/CT 850 Nuclear Medicine / CT Scanners and 2 more products

Wed, 19 May 2021 00:00:00 +0000

GE Healthcare has become aware of a potential issue on 800 family NM/CT Scanners that could cause a shift in CT radiation exposure range of up to 5cm compared to the intended radiation exposure range of the planned scan under specific workflows. The issue occurs only on a hybrid whole-body continuous F3 protocol with Zoom < 1 where the scan range is set on the Smart Console. In some cases, this…